Premium Zigbee RGBCCT LED Floodlight– Wireless Smart Lighting Control

First, you need to add the Zigbee gateway to the corresponding APP (e.g., the "Tuya Smart" App). Then, power off and on the floodlight continuously for at least 4 times to put it into network configuration mode. After that, search for and add the device in the APP to complete pairing and enable control. For detailed pairing methods, please refer to the instruction manual.

It may be that the Zigbee gateway is not working properly. Check if the gateway is powered on, connected to the network, and if the distance between the gateway and the floodlight is too far. It could also be that the gateway has not been correctly added to the APP—you need to re-add the gateway in the APP according to the steps in the gateway manual. Alternatively, the floodlight may not have entered the correct network configuration mode; you can try powering it off and on again.

Yes. As long as these floodlights are within the signal coverage of the same Zigbee gateway or RF remote control, and the gateway or remote control supports multi-device control, you can perform group control.

The main difference between the 20W, 30W, 50W, and 100W floodlights lies in their brightness. Generally, the higher the power, the brighter the light, and the wider the lighting range may be. In addition, floodlights of different powers also differ in energy consumption—the higher the power, the greater the energy consumption.

Our floodlight has a waterproof rating of IP67, providing protection against water and dust.

Under normal usage conditions, the service life of this floodlight can usually reach tens of thousands of hours. However, the actual service life may be affected by factors such as the usage environment, frequency of use, and heat dissipation conditions.